Product Details
Double your visual workspace while maintaining a synchronized horizontal sightline with the TidySetup Dual Monitor Arm Stand. Engineered to support two 13" to 27" monitors (up to 17.6 lbs / 8 kg per arm), this heavy-duty dual mount provides independent 360° rotation, +45°/-45° tilt, ±90° swivel, and tool-free height calibration with integrated cable clips and secure C-clamp or grommet mounting.
- Dual 27-Inch Monitor Capacity: Securely mounts two 13"–27" flat or curved displays side-by-side on a central steel pole mast.
- Synchronized Shared Horizon: Keeps display bezels aligned at exact horizontal eye level to eliminate vertical head bobbing.
- 20° Inward Cockpit Curve: Smooth arm articulation allows monitors to curve gently inward, maintaining equal focal distance across both panels.
- Heavy-Duty Steel & Aluminum Build: Rock-solid central mast supports up to 35.2 lbs total payload without sagging or shaking.
The Financial, Analytical & Multi-Tasking Command Center
Working across multiple spreadsheets, market feeds, and communication apps on separate factory stands leads to uneven monitor heights, wide gaps between screen bezels, and severe neck fatigue from erratic head bobbing.
The TidySetup Dual Monitor Arm Stand (DMA-01) is engineered to unite dual screens into a seamless, high-performance data cockpit. Built around a heavy-gauge steel center pole and dual die-cast articulating arms, this stand allows you to lock two 27-inch displays into perfect horizontal bezel alignment, clearing massive desk space for keypads, documents, and tactile desk pads.
A dual monitor arm stand aligns two display bezels along a continuous horizontal sightline, maintaining an equidistant viewing radius to eliminate vertical cervical fatigue and reduce eye accommodation stress.
Key Performance & Ergonomic Benefits
- Seamless Side-by-Side Alignment: The dual articulating arms position two 27-inch monitors edge-to-edge without center gaps, allowing smooth visual tracking across wide data sheets.
- Equidistant Curved Cockpit Arc: Angle the outer edges of both monitors inward by 15° to 20° so every pixel on both screens remains exactly 20 to 30 inches from your pupils.
- Independent 360° Screen Rotation: Configure your workstation in Dual Landscape, Dual Portrait, or Landscape + Portrait combinations to suit software development, stock charting, or legal document review.
- Reclaims 200+ Sq. Inches: Eliminates two bulky plastic monitor bases, freeing up the entire desk surface beneath your displays for keyboards, drawing tablets, and notebooks.
- Integrated Cable Routing Clips: Central mast and arm clips route power and video cords neatly down behind the center pole into your under-desk tray.
Technical Specifications & Motion Range
| Specification Attribute | Detail / Rating |
|---|---|
| Supported Screen Sizes | Dual 13″ to 27″ Flat and Curved Monitors |
| Weight Capacity | 17.6 lbs (8.0 kg) per arm (35.2 lbs total payload) |
| VESA Compatibility | Standard 75 × 75 mm and 100 × 100 mm |
| Tilt Range | +45° upward to -45° downward |
| Swivel Range | ±90° horizontal joint swivel |
| Screen Rotation | 360° (Full Portrait and Landscape) |
| Center Mast Height | 16.5 inches (420 mm) solid steel pole |
| Arm Span (Full Extension) | 31.5 inches (800 mm) tip-to-tip |
| Desk Clamp Capacity | Desktops 0.4″ to 3.3″ (10 mm to 85 mm) thick |
| Grommet Mount Capacity | Desktops 0.4″ to 2.4″ (10 mm to 60 mm) thick |
| Construction Materials | Heavy-Gauge Cold-Rolled Steel & Die-Cast Aluminum |
Step-by-Step Calibration Protocol
- Mount Central Pole Mast: Secure the heavy-duty steel base clamp to the rear center edge of your desk.
- Slide Dual Arm Assembly: Slide the dual-arm bracket over the center pole to your desired seated eye level and tighten the collar bolt.
- Mount Both Monitors: Attach VESA plates to both displays and slide them onto the arm brackets.
- Angle Displays into Cockpit Arc: Pull both panels forward and angle them inward at 20° until bezels meet flush directly in front of your line of sight.
Frequently Asked Questions (FAQ)
Can this mount hold two 27-inch curved gaming monitors?
Yes. The 31.5-inch total arm span easily accommodates two 27-inch curved screens side-by-side within the 17.6 lbs per arm weight limit.
Can I set one screen vertical and one horizontal?
Yes. Each VESA head rotates 360° independently, allowing you to configure one horizontal landscape monitor alongside one vertical portrait monitor.
Will this stand wobble when I type vigorously?
No. The solid steel center mast and reinforced clamp footing eliminate flex and wobble, providing rock-solid stability on solid wood and heavy laminate desks.
Recommended Ecosystem Pairings
- Under-Desk Wire Tray: Under-Desk Cable Management Tray
- Tactile Pad: Premium PU Leather Desk Mat
- Multi-Monitor Guide: Multi-Monitor Cable Routing: How to Conceal 6+ Wires
Tyler Parker (verified owner) –
Industrial strength dual arm stand. Clamped onto my 48-inch compact walnut sit-stand desk firmly with zero flex. Clean wire clips and great tilt range.
Tyler Parker (verified owner) –
Industrial strength dual arm stand. Clamped onto my 48-inch compact walnut sit-stand desk firmly with zero flex. Clean wire clips and great tilt range.
Alexander Morales (verified owner) –
Outstanding build quality. Holds my dual 27″ monitors rock steady even when raising and lowering my sit-stand desk.
Alexander Morales (verified owner) –
Outstanding build quality. Holds my dual 27″ monitors rock steady even when raising and lowering my sit-stand desk.
Nora Russell (verified owner) –
The DMA-01 is built like a tank and holds two monitors in perfect alignment. The micro-adjustment height screws on the VESA mounts let you level the screens to the exact millimeter. The C-clamp mounted firmly to my 1.5-inch desktop in minutes with zero flex. Highly recommended for dual screen users.