Product Details
Elevate your display to floating ergonomic perfection with the TidySetup Full-Motion Single Monitor Arm. Built with aircraft-grade aluminum and a precision gas-spring counterbalance strut, this heavy-duty mount supports screens from 13" to 32" (up to 19.8 lbs / 9 kg). Enjoy effortless 360° screen rotation, +90°/-45° tilt, ±90° swivel, and integrated cable concealment in sleek Matte Black or Pure White finishes.
- Universal 13"–32" Display Support: Handles flat and curved monitors up to 19.8 lbs (9 kg) with standard VESA 75x75mm and 100x100mm interfaces.
- Effortless Fingertip Positioning: Smooth gas-strut cylinder enables tool-free vertical elevation, depth extension, and tilt adjustments.
- Reclaims 100+ Sq. Inches: Eliminates massive plastic factory monitor bases, clearing the entire central desk surface beneath your screen.
- Dual Mounting Options Included: Heavy-duty silicone-padded C-clamp (0.4"–2.0" desk thickness) and grommet mounting hardware included.
Floating Display Architecture for Ergonomic Comfort
Standard factory monitor stands are bulky, non-adjustable, and trap your display too low and too close to your eyes. The TidySetup Full-Motion Single Monitor Arm replaces static OEM stands with a precision-counterbalanced articulating arm that allows your screen to float effortlessly in 3D space.
Designed for knowledge workers, software developers, and digital creatives, this single monitor mount lets you pull your screen forward for detailed vector drafting or text editing, push it back for open writing room, or rotate it 90° for full-page code reviewing.
A full-motion single monitor arm decouples the display from the tabletop, allowing continuous height, focal distance (20–30 inches), and tilt adjustments while freeing over 100 square inches of primary desk space.
Key Ergonomic & Mechanical Advantages
- Anatomical Sightline Calibration: Adjust screen height so the top third of the display aligns with seated eye level, preventing forward head tilt and relieving cervical spine pressure.
- 360° Landscape-to-Portrait Rotation: Switch seamlessly between horizontal widescreen mode for video editing/spreadsheets and vertical portrait mode for programming and reading long PDF documents.
- Heavy-Duty Gas Strut Mechanism: Internal pneumatic gas cylinder counterbalances the exact weight of your screen, ensuring it stays firmly in position without drooping or wobbling during typing.
- Integrated Cable Management: Snap-on wire channels along the upper and lower aluminum arm segments conceal power and DisplayPort lines for a clean, wireless appearance.
- Non-Damaging Desk Attachment: Padded C-clamps grip delicate solid wood, laminate, and glass-topped desks firmly without scratching or indenting surfaces.
Technical Specifications & Compatibility Matrix
| Specification Attribute | Detail / Rating |
|---|---|
| Supported Screen Sizes | 13″ to 32″ Flat and Curved Monitors |
| Weight Load Capacity | 4.4 to 19.8 lbs (2.0 to 9.0 kg) |
| VESA Compatibility | 75 × 75 mm & 100 × 100 mm (Detachable plate) |
| Tilt Range | +90° upward to -45° downward |
| Swivel Range | ±90° left to right |
| Screen Rotation | 360° (Landscape and Portrait) |
| Vertical Height Lift Range | 10.0 inches (254 mm) elevation travel |
| Maximum Forward Extension | 19.5 inches (495 mm) reach |
| Desk Thickness (Clamp) | 0.4″ to 2.0″ (10 mm to 50 mm) |
| Desk Thickness (Grommet) | 0.4″ to 2.4″ (10 mm to 60 mm) |
| Color Options | Matte Anodized Black / Pure Minimalist White |
Step-by-Step Installation Guide
- Install Base Clamp: Fasten the padded C-clamp to the rear edge of your desk and tighten the heavy-duty hand bolt.
- Attach VESA Plate: Bolt the detachable VESA plate to the back of your monitor using the included M4/M5 screws.
- Slide Monitor onto Arm: Lower the monitor onto the arm head until the quick-release lock clicks into place.
- Tune Tension: Turn the counter-balance screw with the included 5mm hex key until your monitor floats effortlessly at any desired height.
Frequently Asked Questions (FAQ)
Will this monitor arm hold a 34-inch ultrawide display?
Yes, provided the ultrawide display weighs under 19.8 lbs (9.0 kg) without its original stand and utilizes a 75x75mm or 100x100mm VESA pattern.
Can I push my desk flat against a wall with this arm installed?
Yes. The dual-joint articulating elbows can fold flat along the rear edge of your desk, requiring only 2 to 3 inches of clearance behind the desk.
What if my monitor does not have screw holes on the back?
Non-VESA monitors require a universal VESA adapter bracket before mounting to any standard monitor arm.
Recommended Ecosystem Pairings
- Surface Cushion: Premium PU Leather Desk Mat
- Glare-Free Task Light: 50cm Computer Monitor Light Bar
- Sightline Guide: Monitor Eye Level vs Viewing Angle Guide
Finn Torres (verified owner) –
After trying cheap static stands, this full-motion gas spring arm is a night and day upgrade. The quick-release detachable VESA plate made installing my heavy 32-inch screen totally effortless. Full 360-degree rotation lets me switch to portrait mode for coding in seconds. Highly recommended for any clean setup.
Sloane Taylor (verified owner) –
Upgrading to this gas-spring arm completely transformed my 63-inch matte black executive desk ergonomics. The solid C-clamp mounted securely to my 1.5-inch desktop with zero damage to the wood. The gas spring counterbalance easily holds my Asus ProArt PA278CV 27″ IPS with zero drooping or wobble. Highly recommended for any clean setup.
Hunter Freeman (verified owner) –
Very sturdy, looks sleek in Matte Black, and holds my heavy 32″ display rock-solid. Fluid height adjustment and great tilt range. Highly recommended!
Juliette Taylor (verified owner) –
Best single monitor arm available. 10/10 quality.